Tools Holders
Precision Tools
Vices And Clamps
Cutting Tools
Magnetic Tools
D.I.Y Tools
Machine Accesories
Dressing Tools
Drive Pin Punch 4" (100mm)

Drive Pin Punch 4" (100mm)


  • Single piece made from Hardened and Tempered Tool steel.
  • Tip Hardened to 45-52 HRC.
  • Striking head and front taper centerless ground.
  • Heavy Knurled finger grip.
  • Shiny black oxidized finish.
  • Available in individual sizes and also in set of 4 & 8 attractive plastic case.

Cat No. Punch Diameter
Inch mm
RPP-2900 1/16 1.6
RPP-2901 3/32 2.4
RPP-2902 1/8 3.2
RPP-2903 5/32 4.0
RPP-2904 3/16 4.8
RPP-2905 7/32 5.5
RPP-2906 1/4 6.4
RPP-2907 5/16 8.0
RPP-2908 4 pc Set of Drive Pin Punches 1/16” (1.6 mm),
3/32” (2.4 mm), 1/8” (3.2 mm)
and 5/32”(4.00 mm), in a Plastic Pouch.
RPP-2909 4 pc Set of Drive Pin Punches 3/16” (4.8 mm),
7/32” (5.5 mm), 1/4” (6.4 mm) and 5/16”
RPP-2910 8 PC Set of Drive Pin Punches 1/16” (1.6 mm),
3/32” (2.4 mm), 1/8” (3.2 mm),
5/32” (4.0 mm), 3/16” (4.8 mm),
7/32” (5.5 mm),1/4” (6.4 mm) and
5/16” (8.0 mm) in a Plastic Pouch.

Long Drive Pin Punch 8" (200mm)

Long Drive Pin Punch 8" (200mm)


  • Tip Hardened to HRC 45-52.
  • Punch Section is Centerless ground to check runout.
  • Heavy knurled body with shiny black oxidized finish.
  • Body Length 4-1/2” and Pin Length 3-1/2”.

Cat No. Punch Diameter
Inch mm
RPP-2920 1/8 3.0
RPP-2921 3/16 5.0
RPP-2922 1/4 6.0
RPP-2923 5/16 8.0
RPP-2924 3/8 10.0
RPP-2925 5pc set in inch 1/8" - 3/8" (3mm to 10mm). Available in plastic pouch and bristel packing.

Center Punches (Round Head)

Center Punches (Round Head)


  • Made of Tool steel, Hardened and Tempered. Points are Machined and Ground.
  • Heavy Knurled Body for better grip.
  • Shiny Black finish.
  • Available in individual sizes and alsoin a set of five in attractive plastic pouch.

Cat No. Punch Diameter Length
Inch mm Inch mm
RCP-2941 5/64 2.0 4 100
RCP-2942 3/32 2.5 4 100
RCP-2943 9/64 3.6 4 100
RCP-2944 RCP-2945 (1.6 mm), 5/64” (2.0 mm), 3/32” (2.4 mm), 9/64” (3.6 mm) and 5/32” (4.0 mm)

Center Punches (Square Head)

Center Punches (Square Head)


  • Made of Tool Steel, Hardened and Tempered.
  • Points are Machined and Ground.
  • Heavy Knurled Body for better Grip.
  • Available individually and in Sets

Cat No. Diameter at top of Taper Length Square size
Inch mm Inch mm Inch mm
RCP-2950 1/16 1.6 4 100 3/8 9.5
RCP-2951 5/64 2.0 4 100 3/8 9.5
RCP-2952 3/32 2.5 4 100 3/8 9.5
RCP-2953 9/64 3.6 4 100 3/8 9.5
RCP-2954 5/32 4.0 4 100 3/8 9.5
RCP-2955 Set of Five above sizes of Center Punches in Pouch.

Nail Punches (Round Head)

Nail Punches (Round Head)


  • Hardened and Tempered Tool Steel for long life.
  • Shiny Black oxidized finish.
  • Heavy Knurled Body for better Grip.
  • Very Handy Tool for Carpenters, Model Makers, Machinists, Pattern Makers, etc

Cat No. Size of Tip Length
Inch mm Inch mm
RNP-2960 1/16 1.6 4 100
RNP-2961 3/32 2.5 4 100
RNP-2962 1/8 3.2 4 100
RCP-2953 5/32 4.0 4 100
RNP-2964 3/16 4.8 4 100
RNP-2965 Set of 5 above mentioned Nail Punches in a attractive Plastic Pouch.

Nail Punches (Square Head)

Nail Punches (Square Head)


  • Made of Tool Steel, Hardened and Tempered.
  • Heavy Knurled Body for better grip.
  • Shiny Black Finish.
  • Handy Tool for Carpenters, Model Makers, Machinists etc.
  • Available in individual sizes and also in a set of Five in attractive Plastic Pouch.

Cat No. Size of Tip Length Square size
Inch mm Inch mm Inch mm
RNP-2970 1/16 1.6 4 100 3/8 9.5
RNP-2971 3/32 2.5 4 100 3/8 9.5
RNP-2972 1/8 3.2 4 100 3/8 9.5
RNP-2973 5/32 4.0 4 100 3/8 9.5
RNP-2974 3/16 4.8 4 100 3/8 9.5
RCP-2975 RCP-2975 NP-2975 Set of above Five Punches in Pouch.

Utility Punch And Scriber

Utility Punch And Scriber


  • Hexagonal Body for comfortable grip.
  • Ideal for Punching Holes in sheet metal.
  • Can also be used as a Scriber.
  • Hardened Point.
  • Punch made of Tool Steel.

Cat No. Length Diameter of Punch
Inch mm Inch mm
RUP-2980 7-1/2 190 5/32 4.0

Automatic Center Punch

Automatic Center Punch


  • Fully Hardened and Ground Punch Point.
  • Heavy Knurled Body for definite grip and easy handling.
  • No Hammer is required for operating punch.
  • Force of Impact can be regulated by rotating top Knurled cap.
  • 5” (125 mm) long with Body Diameter of 5/8” (16 mm).

Cat No. Type
RCP-2985 Automatic Center Punch (Brass Body)
RCP-2986 Automatic Center Punch (Steel Body)

Brass Punches (Non Sparking)

Brass Punches (Non Sparking)


  • Made from high quality Brass Hexagonal Stock.
  • Ideal Punches for working in no spark situation.
  • Punch Diameters are undersized app. .005” (0.127 mm)
  • 3-1/2” (90 mm) Long.
  • Available in individual sizes and also in a set of 8 Punches in attractive Plastic Pouch.

Cat No. Size of Tip
Inch mm
RBP-2990 1/16 1.5
RBP-2991 3/32 2.5
RBP-2992 1/8 3.0
RBP-2993 5/32 4.0
RBP-2994 3/16 5.0
RBP-2995 7/32 5.5
RBP-2996 1/4 6.0
RBP-2997 5/16 8.0
RBP-2998 Set of above 8 Brass Punches

Rajkamal Engineering: Contact Now